进口抛光树脂 苏州新吴光电制备**纯水杜笙MB-106UP

   Tulsimer ® MB-106UP为阶核子级抛光树脂, 是由核子级强酸型阳离子Tulsimer ®  T-46Li 及核子级强碱型阴离子 Tulsimer ®  A-33OH 以1:2 体积比的剂量比例 , 预先混合的混床级离子交换树脂,专门提供给**纯水系统抛光用，具有的交换容量及优越的物理特性，出水电导率稳定维持在18.25兆欧。适合用于电子产业 ，生产半导体及映像管产业，实验室，激光，精仪器，医用行业等需要**纯水的行业，以及核电厂等使用。在**我们有数十家 核电厂使用我们的抛光树脂。

 **纯水树脂

基 本 特 性(YPICAL CHARACTERISTICS):Tulsimer ® MB-106UP


Tulsimer ®T-46 (阳)

Tulsimer ®A-33 (阴)

型式(Type)

强酸性阳离子交换树脂 (Strong acid Cation exchange resin)

强碱性阴离子交换树脂 (Strong base Anion exchange resin)

主体结构(Matrix Structure)

(Cross linked polystyrene)

(Cross linked polystyrene)

功能基 (Functional Group)

酸基(Sulfonic acid)

4级胺(Quaternary ammonium Type I)

物理性貭(Physical Form)

球状颗粒(Moist spherical beads)

球状颗粒(Moist spherical beads)

离子型式(Ionic form supplied)

(Hydrogen)

氧(Hydroxide)

粒径范围(sh in wet)

16 to 50

16 to 50

粒度范围 (Particle Size)

0.3 to 1.2 mm

0.3 to 1.2 mm

微粒含量(Fines Content)

穿过US 50 Mesh小于0.5% (Less than

0.5% passing through 50 sh)

穿过US 50 Mesh小于0.5% (Less than

0.5% passing through 50 sh)

总交换容量

(Total Exch. Capacity)

1.8 meq/ml minimum of

99% in hydrogen form

1.0 meq/ml minimum of 90% in hydroxide

form and less than 1% in chloride form

PH范围 (pH Range)

0 to 14

0 to 14

允许温度 (Temp. Stability)

120°C

60°C

微粒含量(Fines Content)

穿过US 50 Mesh小于0.5% (Less than

0.5% passing through 50 sh)

穿过US 50 Mesh小于0.5% (Less than

0.5% passing through 50 sh)

总交换容量

(Total Exch. Capacity)

1.8 meq/ml minimum of

99% in hydrogen form

1.0 meq/ml minimum of 90% in hydroxide

form and less than 1% in chloride form

PH范围 (pH Range)

0 to 14

0 to 14

允许温度 (Temp. Stability)

120°C

60°C

溶解率 (Solubility)

Insoluble in all common solvents

Insoluble in all common solvents

溶出**物(Organic leachable)

Less than 0.2 mg KMNO4

per ml of wet resin

Less than 0.2 mg KMNO4 per ml

of wet resin

密度Backwash settled density

Approx.750 gm/liter

Approx.750 gm/liter

不纯物(Impurities)

Fe=50 ppm(max)

Fe=50 ppm(max)


Cu=50 ppm(max)

Cu=50 ppm(max)


Pb=50 ppm(max)

Pb=50 ppm(max)

球粒强度(Bead strength)

Avg. not less than 300g/bead by Chatillon test (ASTM Standard)
典型案例：
业主公司：苏州新吴光电科技有限公司	工程公司：业主自建
行       业： **纯水行业	地       区： 江苏省
产       品： 纯水树脂	型       号：**纯水抛光树脂MB-106UP
需       求： 制备**纯水	时       间：2017-08-09
制备**纯水项目

EDI产水制18.2兆**纯水